After the door handle cover is removed…
Removing the accessible screws behind the door handle cover.
… You can remove the screws that hold the door panel in place.
Remember to remove the cover around the door opening lever.
You should also remember to remove the cover around the door opening lever, again using one of the tools in the Focal Tool Set.
Access to the last screw that holds the door trim.
Once this is done, you will be able to access the last screw that holds the door trim.
Unclip the door panel – After removing the screws from the door panel, you may want to consider removing it from the door. To do this, you need to loosen the various retaining clips that hold it in place using two Focal tools: one to open the trim and the other to pull out the clips.
Using the Focal Tool Set to Loosen the Door Trim – By inserting and sliding the Focal tools between the door panel and the sheet metal, the location of the retaining clips can be found at a glance.
Use the tools to lift the door trim.
Then, just use lever to remove them one after the other without damaging them.
Loosen the clips around the door panel.
This is done around the perimeter of the door panel to release all clips.
Remove the door panel by lifting it up to release the top.
Once the door panel has been disengaged, it is necessary to lift it to free the upper part of the slot through which the window enters and exits.
Removal of the door panel to access the speaker to be changed.
This frees up access to the speaker to be changed.
Remember to disconnect the connectors and the door opening mechanism.
Care! Remember to disconnect the connectors and the door opening mechanism to completely free up the panel.